|
Ardex Products
|
|
|
|
Ardex is the technological leader pioneering self-leveling and self-drying cement. They have over 50 years of market leadership worldwide.
Ardex invented the self-leveling technology that is the cornerstone of its engineered cements product line. Ardex is the architectural community's most specified subfolder prep solutions.
 
ARDEX SELF-LEVELING UNDERLAYMENTS
ARDEX K15
Self-Leveling Underlayment Concrete
•For use over concrete, terrazzo, ceramic & quarry tile, wooden floors, steel decking, epoxy coatings, cutback adhesive residue.
•Installs from featheredge to any thickness.
•Install floor covering just 16 hours, walkable in just 2 to 3 hours.
•4,100 psi compressive strength.
ARDEX V 800
Self-Leveling Flooring Underlayment
•For use over concrete, terrazzo, ceramic & quarry tile, on, above, or below grade.
•Installs from a featheredge to 3/8" in one pour, and up to 1/2" with the addition of proper aggregate.
•Install floor covering in 2 to 3 days.
•3,600 psi compressive strength.
ARDEX GS4
Self-Leveling, Repair Underlayment for Gypsum & Wood Subfloors
•Used to smooth and repair a gypsum substrate that is otherwise unsuitable to receive new finish flooring.
•Also recommended for use over structurally sound plywood, OSB, and strip wood flooring
•Install from a ¼" up to virtually any thickness to achieve the desired flatness tolerance
•Fast-Drying, can be walked on after 3 hours and can receive floor covering in 2-3 days
•Compressive Strength of 4,000 psi
ARDEX SELF-LEVELING TOPPINGS
ARDEX SD-T
Self-Drying, Self-Leveling Concrete Topping
•For use indoors over concrete subfloors.
•Installs from 1/4" to 2" in one operation.
•Coat with a waterborne concrete sealer just 2 hours after installation.
•6,100 psi compressive strength.
ARDEX K500
Self-Leveling Concrete Topping
•For use indoors over concrete subfloors.
•Installs from 1/4" to 1-1/2" in one operation.
•Walkable in 3 hours, coat with a waterborne concrete sealer the next day.
•5,300 psi compressive strength.
ARDEX PRIMERS & EMULSION for SELF-LEVELING PRODUCTS
ARDEX P51
Concentrated Primer
•For use on standard absorbent concrete.
ARDEX P82
Ultra Prime
•For use on non-porous subfloors, wood and adhesive residues.
ARDEX EP2000
Substrate Preparation Epoxy
•Especially suited to prime concrete and non-porous substrates prior to installing ARDEX SD-T Designer FloorsTM.
ARDEX E-25
Resilient Emulsion
•For use with ARDEX K-15 Self-Leveling Underlayment Concrete and ARDEX K-500 Self-Leveling Concrete Topping in certain applications.
For more information see:
ARDEX K 15 Technical/Installation Info
FLOORING UNDERLAYMENTS
ARDEX FEATHER FINISH
Self-Drying, Cement-Based Finishing Underlayment
•For use over concrete, terrazzo, ceramic & quarry tile, wood, residential cutback adhesive residue.
•Installs from a true featheredge up to any thickness.
•Install floor covering in as little as 30 minutes.
ARDEX SD-P Instant Patch
Self-Drying, Fast Setting Concrete Underlayment
•For use over concrete, terrazzo, ceramic & quarry tile.
•Installs from a featheredge to 1" thick and up to 3" with aggregate.
•Install floor covering in one hour.
•4,200 psi compressive strength.
ARDEX MC Moisture Control System
ARDEX MC Moisture Control System
•Solvent-free alkali resistant, low-viscosity
•Used prior to the installation of ARDEX Engineered Cements over concrete
•For new or existing concrete that has moisture levels in excess of the maximum allowed by the manufacturer of the finish floor covering or coating
ARDEX S-21 Smoothing Compound
•Pre-smoothes substrate to receive ARDEX MC Moisture Control System (if necessary)
•Completely water resistant
•High comprehensive and flexural strengths
•For use on all grade levels of concrete
|
|
|
|
Featured Below:
|
|
ARDEX
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Over Ceramic
|
|
|
|
|
|
|
|
|
|
|
Over Wood
|
|
|
|
|
|
|
|
|
|
|
Over cutback adhesive residue and more!!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
;)
;)
;)
;)
;)
;)
;)
;)
