Aqua Mix® Penetrating Sealer
Picture
 

Aqua Mix® Penetrating Sealer

Penetrating Sealer is an economical, no sheen, water based penetrating / impregnating sealer for all porous natural stone, tile & grout surfaces. Formulated to provide excellent protection. Perfect for very porous stone and tile. An ideal sealer for concrete, sandstone & brick. Last up to 5 years.

  • 3.78 L / 1 gal #PESEG
  • 946 ml / 32 oz #PESEQ

Specifications

  • Excellent stain protection
  • May be used as a pre-grouting sealer
  • Allows moisture vapour transmission
  • No-sheen natural look
  • Does not alter the slip resistance of sealed surface
  • Easy to use
  • Water-based, non VOC formula
  • Lasts up to 5 years

Suitable Tile Types:
As a natural look sealer for all porous natural stone surfaces (such as sandstone, slate, marble, limestone, granite, bluestone / basalt) unglazed tiles, porcelain tiles, clay pavers, concrete, brick, masonry, terracotta and grout. For interior and exterior use.


Limitations

  • Do not allow product to come in contact with any non-recommended surface
  • If product is allowed to dry on surface, a white film may form. If this occurs, scrub surface with Aqua Mix® NanoScrub® and a white nylon pad
  • Sealer will not prevent surface wear or etching from acids or caustic chemicals
  • Note: Aqua Mix® Ultra-Solv® or Sealer’s Choice® Gold are recommended in place of Penetrating Sealer in food preparation areas or where maximum stain protection is required