- SKU 1043
For internal cuts, omni-directional. The Separating blade is the same size as the Standard blade and has exactly the same cutting action. The difference is that the Separating Blade is made from a stainless steel wire that is coated with the same high quality process as all our blades and then has a coupling attached to it which is also coated for protection and smooth action.
-
$133.49
Specifications+
- Functions as an omni-directional blade when cutting thin material like stained glass, but thicker materials should only be cut using a forward and backward motion
- Great blade for dense materials - "teardrop" design cuts dense glass, tile, stone, shell, nonferrous metals, and hard plastics such as acrylic and lexan
- Cuts mainly on the front and back, so to create a curve you will guide the material around the blade - any sideways cutting will leave a large wide swath
- It's rigidity has the ability to damage the saw itself if used improperly by pushing too hard
- Keep in mind the “golden rule” to let the saw do the cutting and do not force the material
- It is best to avoid cutting thin dichroic glass with this blade as it will likely chip!
- Comes with 2 orange groove grommets
- Forme de lame : Rond 0,072 Diamètre (note 1/16" égale 0.063 et 1mm égale 0.0394) Le grain est agressif.
- Épaisseur du matériau Capacité : 3/8", l'utilisation normale est de 1/8" verre d'art, 1/4" carrelage à paroi souple.
- Ce qu'il faut éviter : Ne pas utiliser pour les carreaux de céramique, les pièces de verre fondu de 3/8" ou les matériaux épais en général.
- Durée de vie moyenne de la lame : 40-60 heures
- Blade Shape: Round 0,072 Diameter (note 1/16" equals 0.063 and 1mm equals 0.0394) Grit is aggressive.
- Material Thickness Capacity: 3/8", normal use is 1/8" art glass, 1/4" soft wall tile.
- What to Avoid: Do not use for ceramic tile, 3/8" fused glass pieces, or thick material in general.
- Average Blade Life: 40-60 hours